H-WASH 500 -Duurzame prestatie | Hoover (2024)

FAQs

What are the settings for H wash 500? ›

The E08 error code on a Hoover washing machine indicates that there is a problem with the motor and/or the motor speed sensor. If either of these parts are faulty, you'll need to replace the motor to get your washing machine up and running again.

The machine is unable to drain the water away

Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

Choose the Right Wash Cycle

A regular cycle is best for sturdy and dirty clothes, while the permanent press setting is fine for the average load. Use the delicate cycle for lacy and loosely woven fabrics. Use hot water for white loads, warm water for the average load, and cold water for bright colors.

Reset your washing machine

What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a "reset" of the washer.

Your Hoover washing machine displays an error code or the display is flashing. There may be a problem with the water supply, the door won't close, or there's too much foam in the drum. You can often solve the error yourself.

If the buttons on the machine are unresponsive or the cycle will not start demo mode may have been activated. To remove from demo mode press and hold the buttons "Memo" and "Anti crease" for 7 seconds. If the buttons on the machine are unresponsive or the cycle will not start demo mode may have been activated.

Total CareTH-DISH is equipped with the new Total Care+, a specific set of accessories that ensure the maximum care ever. The dedicated rubber coated supports take care of your most precious and delicate items like crystals, wine glasses and more.

Error code E07 means there is a problem with either the washing machine door lock, or the motor. (In some models error code E01 will be displayed if there is a door lock fault.)

What does error E02 mean on Hoover H wash 500? ›

E02. You'll see this error code if/when the washing machine fails to fill. It indicates there could be a blocked fill hose, or an issue with either the water supply or the valves.

Check the drain pump is not blocked

On some models an obstruction or blockage in the drain pump may cause E20 to appear in the display. Please watch our video clip to show you how to check for and remove any blockages from the drain pump.

When you see E13 displayed, or an LED continuously blinking thirteen times between pauses, this is your machine's way of letting you know precisely what has gone wrong with it. In this case error code E13 relates to a fault with either the control board, dryer heater or temperature sensor.

What does error code E14 mean on a Hoover tumble dryer? The Hoover tumble dryer E14 error code indicates that there is a problem with the rear NTC temperature sensor.

Most brands of washing machines have a hot water setting around 130°F, warm water setting between 90°F to 110°F, and cold water between 60°F and 80°F.

Normal. With high agitation and a lengthy cycle, the Normal wash cycle is actually the most intense option. You'll want to select the Normal cycle for everyday laundry items made of cotton, linen, and articles made of durable synthetics such as sheets, towels, T-shirts, socks, and underwear.