- Manuals
- Brands
- Aiper Manuals
- Swimming Pool Vacuum
- Seagull 1000
- User manual
Robotic pool cleaner
Hide thumbs
-
- Contents Table of Contents
- Bookmarks
Advertisem*nt
Quick Links
- 1 Table of Contents
- 2 Introduction
- 3 Operations
- 4 Frequently Asked Questions (Faq)
- 5 Warranty
- Download this manual
ROBOTIC POOL CLEANER
User Manual
Seagull 1000
Table ofContents
Advertisem*nt
Related Manuals for Aiper Seagull 1000
-
Swimming Pool Vacuum Aiper Seagull Pro User Manual
Robotic pool cleaner (20 pages)
-
Swimming Pool Vacuum Aiper Scuba SE User Manual
Robotic pool cleaner (60 pages)
-
Swimming Pool Vacuum Aiper Seagull 600 User Manual
Robotic pool cleaner (20 pages)
-
Swimming Pool Vacuum Aiper Seagull 1500 User Manual
Robotic pool cleaner (20 pages)
-
Swimming Pool Vacuum Aiper Seagull 3000 User Manual
(20 pages)
-
Swimming Pool Vacuum Aiper Seagull 800B User Manual
Robotic pool cleaner (19 pages)
-
Swimming Pool Vacuum Aiper Scuba E1 User Manual
Robotic pool cleaner (71 pages)
-
Swimming Pool Vacuum Aiper Orca 1200 Pro User Manual
Robotic pool cleaner (16 pages)
-
Swimming Pool Vacuum Aiper Scuba N1 User Manual
Robotic pool cleaner (68 pages)
-
Swimming Pool Vacuum Aiper Orca 800 Mate User Manual
(16 pages)
Summary of Contents for Aiper Seagull 1000
- Page 1 ROBOTIC POOL CLEANER User Manual Seagull 1000...
- Page 3 Thank you for choosing AIPER robotic pool cleaner. You have joined millions of people to enjoy the convenience of robotic pool cleaning. This user manual helps you to keep your robot performing at its best. Please take a few moments to read through it.
-
Page 4: Table Of Contents
CONTENTS Important Precautions ---------------------------- 1. Introduction ------------------------------------- 2. Structure ---------------------------------------- 3. Specifications ----------------------------------- -------------------------------------- 4. Operations 5. Frequently Asked Questions (FAQ) ------------ 6. Packing List ------------------------------------- ---------------------------------------- 7. Warranty... -
Page 5: Important Precautions
Important Precautions 1. Read the manual carefully, and use the cleaner according to the manual. We are not liable for any losses or injuries caused by improper use. 2. Only use the accessories recommended or sold by the manufacturer. 3. This model only applies to swimming pools with a flat floor. 4. -
Page 6: Introduction
21. Make sure the charging socket is dried before charging. 1. Introduction The robotic pool cleaner Seagull 1000 is a new type of rechargeable auto- matic cleaning equipment for swimming pools, cordless and easy to use. Please read the manual carefully before use so that you can use it correctly. -
Page 7: Specifications
3. Specifications 1.Model: Seagull 1000 2. Rated Working Voltage: 12.6V 3. Power: 50W 4. Run Time: 90 Minutes 5. Charger Input: 100~240V, 50/60Hz 6. Charger Output: 12.6V/1.8A 7. Battery Capacity: 5000mAh 8. Charging Time: 5~6 Hours 9. Pool Size: Up to 1076sq.ft (100㎡) 10. -
Page 8: Operations
4. Operations 4.1 Precautions a. Put into or lift out from the pool with the cleaner bottom towards the wall to avoid any possible scratch damage to the pool. b. Install the brush before use to prevent possible dirt from leakage. - Page 9 4.2 Quick Operation a. Install the floating handle *Adjust the tow rope according to the swimming pool depth. *Tie the rope to the position indicated in the image below. b. Install the swing plate Insert the swing plate in the place indicated in the image below. c.
- Page 10 d. Turn the switch knob to ON after putting it into water. Now the cleaner is power-on and the indicator light is steady blue. The cleaner begins to work about 15 seconds later while the blue light flashes. e. The blue light flashes three times after completing the working cycle and then the cleaner stops to run about 2 minutes later while the indicator light is steady blue.
- Page 11 Setting One: default setting: 0°--20°, for most of the pools. Nozzle Angle Moving Route Setting Two: 0°--40°, when the cleaner does not have full coverage of the pool. Nozzle Angle Moving Route...
- Page 12 Setting Three: 20°--20°, for round pools. Nozzle Angle Moving Route Note: These are recommended settings and different settings might apply to specific pools. So the operator can adjust the settings according to the principle of nozzle settings and the actual situation of the pool.
- Page 13 4.4 Filter Cleaning a. Open the cleaner by clips b. Take off the filter tray...
- Page 14 c. Clean the filter tray and chassis d. Reassemble the cleaner...
- Page 15 e. Push the clips on 4.5 Installation & Removal of Swing Plate The swing plate can be removed by poking the base buckle upwards and installed by inserting it into the base.
- Page 16 4.6 Protective Cap for Charging Port Take the protective cap off to charge Close the protective cap to the charging plug after charging completed. Note: After each use, wipe and dry the charging pin with paper towel or cotton swab. Wait for a few minutes to let the moisture dry out before charging.
-
Page 17: Frequently Asked Questions (Faq)
5. Frequently Asked Questions (FAQ) Q: What are the light indicators when the machine is running? 1. Steady blue light indicates the normal startup; 2. The blue indicator flashing slowly during operation means the system runs normally; 3. The blue light flashing quickly means low battery, please recharge the cleaner. -
Page 18: Packing List
Wait for a few minutes to let the moisture dry out before charging. 6. Packing List Item Name Model QTY (pc) Application Seagull 1000 Cleaner Charger User Manual Brush Tow Rope Floating Handle 7. Warranty This product has passed all quality control and safety tests, conducted by the technical department of the factory. - Page 20 Aiper Customer Service: US Toll Free: 1-866-850-0666 Email: service@aiper.com Facebook: @AiperOfficial...